2903701 Phoenix Contact Control Relays

Product Details

• Depth
  45.5 mm
• Degree of protection
  RT I
• Typical response time
  5 ms ... 25 ms (depending on phase relation)
• Power dissipation for nominal condition
  2.76 W
• Minimum switching voltage
  10 V (At 24 mA)
• Interrupting rating (ohmic load) max.
  384 W (at 24 V DC)
• Connection method
  Plug connection
• Insulation
  Basic insulation
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.1
  27371100
• ECLASS 6.0
  27371600
• ETIM 6.0
  EC001437
• UNSPSC 13.2
  39122334
• UNSPSC 21.0
  39122334
• Width
  38.6 mm
• Mains frequency
  50/60 Hz
• Contact type
  2 changeover contacts
• Contact material
  AgNi
• Switching capacity
  2 A (at 24 V, DC13)
• Single-phase motor load
  800 W (at 230 V, AC3)
Connection in acc. with standard
CSA
Rated insulation voltage
250 V AC
ECLASS 5.0
27371600
ETIM 2.0
EC001437
UNSPSC 11
39121515
Ambient temperature (operation)
-40 °C ... 55 °C
Typical input current at UN
12 mA
Maximum switching voltage
440 V AC
Limiting continuous current
16 A
Operating mode
100% operating factor
Mounting position
any
Rated surge voltage
4 kV
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334
Input voltage range in reference to UN
see diagram
Typical release time range
5 ms ... 20 ms (depending on phase relation)
Maximum inrush current
50 A (20 ms, N/O contacts)
Motor load according to UL 508
1/3 HP, 120 V AC (N/O contact)
Service life, electrical
see diagram
Standards/regulations
IEC 60664
ECLASS 10.0.1
27371601
Overvoltage category
III
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
Height
36.1 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage UN
230 V AC
Type of switch contact
Single contact
Min. switching current
10 mA (at 24 V)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 107 cycles
Pollution degree
3
Designation
Corrosive gas test
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 18.0
39122334