2903667 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 55 °C
• Degree of protection
  RT I
• Mains frequency
  50/60 Hz
• Power dissipation for nominal condition
  1.56 W
• Contact type
  2 changeover contacts
• Limiting continuous current
  12 A
• Mounting position
  any
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Pollution degree
  3 (Rated voltage of 230 V)
• Designation
  Corrosive gas test
• ECLASS 4.0
  27371100
• ECLASS 9.0
  27371601
• UNSPSC 7.0901
  39121515
• UNSPSC 13.2
  39122334
• UNSPSC 21.0
  39122334
• Width
  21.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  5 ms ... 15 ms (depending on phase relation)
• Type of switch contact
  Single contact
• Min. switching current
  5 mA (at 24 V)
Service life, electrical
see diagram
Standards/regulations
IEC 60664
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 18.0
39122334
Motor load according to UL 508
1/2 HP, 240 V AC
Connection method
Plug connection
Overvoltage category
III
Rated surge voltage
4 kV
ECLASS 10.0.1
27371601
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 7.0
EC001437
Operating mode
100% operating factor
Rated insulation voltage
250 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ECLASS 6.0
27371600
UNSPSC 6.01
30211916
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Mechanical service life
approx. 2x 107 cycles
Connection in acc. with standard
CSA
Insulation
Basic insulation
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
Depth
35.6 mm
Maximum switching voltage
250 V AC/DC
Typical input current at UN
13 mA
Status display
Yellow LED
Contact material
AgNi
Interrupting rating (ohmic load) max.
288 W (at 24 V DC)
UNSPSC 19.0
39122334
Minimum switching voltage
5 V (At 24 mA)
Switching capacity min.
0.12 W
Height
27.5 mm
Nominal input voltage UN
120 V AC
Maximum inrush current
30 A (20 ms, N/O contacts)
Input voltage range in reference to UN
see diagram
Typical release time range
5 ms ... 20 ms (depending on phase relation)