2903375 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 60 °C
• Typical response time
  5 ms
• Width
  6.2 mm
• Input voltage range in reference to UN
  see diagram
• Protective circuit
  Damping diode
• Type of switch contact
  Single contact
• Maximum inrush current
  10 A (4 s)
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Mechanical service life
  approx. 2x 107 cycles
• Connection name
  Contact side
• Standards/regulations
  DIN EN 50178
• Insulation
  safe isolation
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.1
  27371100
• ECLASS 9.0
  27371601
• ETIM 7.0
  EC001437
• UNSPSC 12.01
  39121516
• UNSPSC 20.0
  39122334
• Height
  84 mm
• Degree of protection
  IP20 (Relay base)
Coil voltage
12 V DC
Power dissipation for nominal condition
0.19 W
Contact material
AgSnO
Min. switching current
10 mA (at 12 V)
Flammability rating according to UL 94
V2 (Housing)
Mounting position
any
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.5 mm² ... 4 mm²
Rated surge voltage
6 kV
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27371600
ECLASS 7.0
27371601
UNSPSC 11
39121516
UNSPSC 19.0
39122334
Depth
82 mm
Nominal input voltage UN
12 V DC
Typical release time
8 ms
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC
Limiting continuous current
6 A
Operating mode
100% operating factor
Connection method
Screw connection
Conductor cross section flexible
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Designation
Corrosive gas test
ECLASS 4.0
27371100
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
16 mA
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 1.5 mm²
Conductor cross section AWG
20 ... 12 (solid)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371601
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 18.0
39122334
Contact type
1 changeover contact
Minimum switching voltage
5 V (at 100 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Switching capacity
1 A (at 24 V, DC13)
Service life, electrical
see diagram
Stripping length
7 mm
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 1.5 mm²
Rated insulation voltage
250 V AC
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 6.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 13.2
39122334