2903372 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 60 °C
• Typical input current at UN
  9 mA
• Coil voltage
  24 V DC
• Min. switching current
  10 mA (at 12 V)
• Note
  the following values are applicable if a gold layer is destroyed
• Flammability rating according to UL 94
  V2 (Housing)
• Mounting position
  any
• Connection method
  Screw connection
• Torque
  0.5 Nm ... 0.6 Nm
• Rated surge voltage
  6 kV
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 11.0
  27371601
• ECLASS 6.0
  27371600
• ETIM 6.0
  EC001437
• UNSPSC 7.0901
  39121516
• UNSPSC 19.0
  39122334
• Depth
  82 mm
• Typical response time
  5 ms
• Protective circuit
  Damping diode
• Minimum switching voltage
  5 V (at 100 mA)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 2x 107 cycles
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 1.5 mm²
Rated insulation voltage
250 V AC
Designation
Corrosive gas test
ECLASS 4.1
27371100
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
84 mm
Degree of protection
IP20 (Relay base)
Typical release time
8 ms
Power dissipation for nominal condition
0.22 W
Contact material
AgSnO
Limiting continuous current
6 A
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
20 ... 12 (solid)
Insulation
safe isolation
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371100
ETIM 3.0
EC001437
UNSPSC 11
39121516
UNSPSC 21.0
39122334
Nominal input voltage UN
24 V DC
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Service life, electrical
see diagram
Stripping length
7 mm
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 1.5 mm²
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ECLASS 9.0
27371601
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range in reference to UN
see diagram
Contact type
1 changeover contact
Maximum switching voltage
250 V AC/DC
Maximum inrush current
50 mA
Switching capacity
2 A (at 24 V, DC13)
Connection name
Contact side
Conductor cross section flexible
0.5 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 20.0
39122334