2903359 Phoenix Contact Control Relays

Product Details

• Height
  93 mm
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  9 mA
• Typical response time
  5 ms
• Protective circuit
  Damping diode
• Contact material
  AgSnO
• Limiting continuous current
  6 A
• Operating mode
  100% operating factor
• Mechanical service life
  approx. 2x 107 cycles
• Connection method
  Push-in connection
• Conductor cross section flexible
  0.14 mm² ... 1.5 mm²
• Insulation
  safe isolation
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.1
  27371100
• ECLASS 6.0
  27371600
• ETIM 3.0
  EC001437
• UNSPSC 7.0901
  39121516
• UNSPSC 19.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Depth
66 mm
Degree of protection
IP20 (Relay base)
Input voltage range in reference to UN
see diagram
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Switching capacity
2 A (at 24 V, DC13)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Service life, electrical
see diagram
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
24 ... 16
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 11
39121516
UNSPSC 20.0
39122334
Ambient temperature (operation)
-40 °C ... 60 °C
Coil voltage
24 V DC
Power dissipation for nominal condition
0.22 W
Maximum switching voltage
250 V AC/DC
Maximum inrush current
50 mA
Note
the following values are applicable if a gold layer is destroyed
Flammability rating according to UL 94
V2 (Housing)
Stripping length
8 mm
Standards/regulations
DIN EN 50178
Designation
Corrosive gas test
ECLASS 10.0.1
27371601
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Pollution degree
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
ETIM 2.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
Nominal input voltage UN
24 V DC
Typical release time
8 ms
Contact type
1 N/O contact
Minimum switching voltage
5 V (at 100 mA)
Min. switching current
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Mounting position
any
Connection name
Output side
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Rated insulation voltage
250 V AC
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 12.01
39121516