2903350 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  IP20 (Relay base)
• Nominal input voltage UN
  24 V DC
• Typical release time
  10 ms
• Power dissipation for nominal condition
  0.43 W
• Contact material
  AgNi
• Limiting continuous current
  8 A (see diagram)
• Operating mode
  100% operating factor
• Mechanical service life
  approx. 3x 107 cycles
• Connection name
  Contact side
• Conductor cross section flexible
  0.5 mm² ... 4 mm²
• Type of note
  Notes on operation
• Depth
  75 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Coil voltage
  24 V DC
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC
• Min. switching current
  10 mA (At 5 V)
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Service life, electrical
  see diagram
Connection method
Screw connection
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Rated surge voltage
6 kV
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 3.0
EC001437
ETIM 2.0
EC001437
UNSPSC 11
39121516
UNSPSC 13.2
39122334
Note
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Ambient temperature (operation)
-40 °C ... 70 °C
Input voltage range in reference to UN
see diagram
Protective circuit
Damping diode
Contact type
2 changeover contacts
Minimum switching voltage
5 V (at 10 mA)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Torque
0.5 Nm ... 0.6 Nm
Overvoltage category
III
Designation
Corrosive gas test
ECLASS 5.0
27371600
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Width
16 mm
Height
89 mm
Typical input current at UN
18 mA
Typical response time
8 ms
Type of switch contact
Single contact
Maximum inrush current
25 A (20 ms, N/O contacts)
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Conductor cross section AWG
20 ... 10 (solid)
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371601
ETIM 4.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 12.01
39121516
UNSPSC 20.0
39122334
Standards/regulations
DIN EN 50178
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 19.0
39122334