2903344 Phoenix Contact Control Relays

Product Details

• ECLASS 4.1
  27371100
• Typical release time range
  3 ms ... 20 ms
• Contact material
  AgNi
• Limiting continuous current
  12 A (20 ms, N/O contacts)
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  approx. 107 cycles
• Service life, electrical
  see diagram
• Note
  the following values are applicable if a gold layer is destroyed
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Nominal input voltage UN
  120 V AC
• Input voltage range in reference to UN
  see diagram
• Operating voltage display
  Yellow LED
• Minimum switching voltage
  5 V (at 10 mA)
• Maximum inrush current
  50 mA
• Flammability rating according to UL 94
  V2 (Housing)
• ETIM 3.0
  EC001437
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  89 mm
• Depth
  75 mm
• Mains frequency
  50/60 Hz
Typical input current at UN
8 mA
Coil voltage
120 V AC
Contact type
2 changeover contacts
Maximum switching voltage
250 V AC/DC
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Connection name
Contact side
Conductor cross section AWG
20 ... 10 (solid)
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 2.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 19.0
39122334
Type of note
Notes on operation
Width
16 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (Relay base)
Typical response time
3 ms ... 12 ms
Protective circuit
Varistor
Type of switch contact
Single contact
Min. switching current
10 mA (At 5 V)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Operating mode
100% operating factor
Mounting position
any
Connection method
Screw connection
Conductor cross section flexible
0.5 mm² ... 4 mm²
Rated surge voltage
6 kV
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 20.0
39122334
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Pollution degree
2
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 18.0
39122334
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 11
39121516
UNSPSC 21.0
39122334