2903340 Phoenix Contact Control Relays

Product Details

• Width
  16 mm
• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
• Coil voltage
  120 V AC
• Power dissipation for nominal condition
  0.96 W
• Minimum switching voltage
  12 V (at 10 mA)
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  approx. 107 cycles
• Assembly instructions
  In rows with zero spacing
• Conductor cross section solid
  0.14 mm² ... 1.5 mm²
• Insulation
  safe isolation
• ECLASS 5.0
  27371600
• ETIM 2.0
  EC001437
• ETIM 7.0
  EC001437
• UNSPSC 20.0
  39122334
• Height
  93 mm
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Nominal input voltage UN
  120 V AC
• Typical response time
  3 ms ... 12 ms
• Type of switch contact
  Single contact
Min. switching current
10 mA (at 12 V)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V2 (Housing)
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Rated insulation voltage
250 V AC
Designation
Corrosive gas test
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 13.2
39122334
Note
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Degree of protection
IP20 (Relay base)
Typical input current at UN
8 mA
Protective circuit
Varistor
Contact type
1 changeover contact
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Service life, electrical
see diagram
Connection method
Push-in connection
Standards/regulations
DIN EN 50178
ECLASS 11.0
27371601
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 11
39121516
UNSPSC 21.0
39122334
Type of note
Notes on operation
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Mains frequency
50/60 Hz
Typical release time range
3 ms ... 20 ms
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC
Limiting continuous current
10 A (see diagram)
Mounting position
any
Connection name
Contact side
Rated surge voltage
6 kV
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Contact material
AgNi
Maximum inrush current
25 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Stripping length
8 mm
Conductor cross section AWG
26 ... 16 (solid)
Pollution degree
2
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334