2903334 Phoenix Contact Control Relays

Product Details

• Depth
  75 mm
• Type of note
  Notes on operation
• Height
  93 mm
• Note
  FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
• Degree of protection
  IP20 (Relay base)
• Typical input current at UN
  18 mA
• Coil voltage
  24 V DC
• Operating voltage display
  Yellow LED
• Type of switch contact
  Single contact
• Minimum switching voltage
  5 V (at 10 mA)
• Min. switching current
  10 mA (At 5 V)
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Operating mode
  100% operating factor
• Mechanical service life
  approx. 3x 107 cycles
• Connection name
  Contact side
• Conductor cross section solid
  0.14 mm² ... 1.5 mm²
• Rated surge voltage
  6 kV
• Identification
  ISA-S71.04. G3 Harsh Group
• Designation
  Corrosive gas test
• ECLASS 4.0
  27371100
ECLASS 11.0
27371601
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
Width
16 mm
Nominal input voltage UN
24 V DC
Typical response time
8 ms
Power dissipation for nominal condition
0.43 W
Maximum switching voltage
250 V AC/DC
Limiting continuous current
8 A (see diagram)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Conductor cross section AWG
26 ... 16 (solid)
Standards/regulations
DIN EN 50178
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ECLASS 9.0
27371601
ETIM 3.0
EC001437
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C
Input voltage range in reference to UN
see diagram
Typical release time
10 ms
Contact type
2 changeover contacts
Contact material
AgNi
Maximum inrush current
25 A (20 ms, N/O contacts)
Switching capacity
2 A (at 24 V, DC13)
Service life, electrical
see diagram
Mounting position
any
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Pollution degree
2
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ECLASS 5.1
27371600
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 11
39121516
UNSPSC 19.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Damping diode
UNSPSC 6.01
30211917
UNSPSC 12.01
39121516
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334