2903331 Phoenix Contact Control Relays

Product Details

• Note
  FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
• Nominal input voltage UN
  230 V AC
• UNSPSC 21.0
  39122334
• Type of note
  Notes on operation
• Height
  93 mm
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Degree of protection
  IP20 (Relay base)
• Operating voltage display
  Yellow LED
• Typical response time
  3 ms ... 12 ms
• Contact material
  AgNi
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  approx. 107 cycles
• Service life, electrical
  see diagram
• Connection name
  Contact side
• Rated surge voltage
  6 kV
• Designation
  Corrosive gas test
• Overvoltage category
  III
• ECLASS 5.0
  27371600
ECLASS 7.0
27371601
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Mains frequency
50/60 Hz
Typical release time range
3 ms ... 20 ms
Power dissipation for nominal condition
1.38 W
Minimum switching voltage
5 V (at 10 mA)
Maximum inrush current
12 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Mounting position
any
Connection method
Push-in connection
Standards/regulations
DIN EN 50178
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27371100
ETIM 2.0
EC001437
UNSPSC 11
39121515
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Width
16 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
6 mA
Protective circuit
Varistor
Type of switch contact
Single contact
Min. switching current
10 mA (At 5 V)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ECLASS 6.0
27371600
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334
Coil voltage
230 V AC
Contact type
2 changeover contacts
Maximum switching voltage
250 V AC/DC
Limiting continuous current
8 A (see diagram)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Conductor cross section AWG
26 ... 16 (solid)
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371100
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334