2903329 Phoenix Contact Control Relays

Product Details

• Contact material
  AgNi
• Note
  the following values are applicable if a gold layer is destroyed
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Mains frequency
  50/60 Hz
• Coil voltage
  24 V AC
• Maximum inrush current
  50 mA
• Type of note
  Notes on operation
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  33 mA
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC
• Interrupting rating (ohmic load) max.
  192 W (at 24 V DC)
• Mounting position
  any
• Connection name
  Contact side
• Conductor cross section AWG
  26 ... 16 (solid)
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.1
  27371100
• ETIM 3.0
  EC001437
• Height
  93 mm
• Degree of protection
  IP20 (Relay base)
Protective circuit
Varistor
Power dissipation for nominal condition
0.79 W
Limiting continuous current
12 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Designation
Corrosive gas test
ECLASS 4.0
27371100
ECLASS 6.0
27371600
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334
Width
16 mm
Nominal input voltage UN
24 V AC
Typical response time
3 ms ... 12 ms
Type of switch contact
Single contact
Minimum switching voltage
5 V (at 10 mA)
Switching capacity
2 A (at 24 V, DC13)
Service life, electrical
see diagram
Connection method
Push-in connection
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
Pollution degree
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
75 mm
Input voltage range in reference to UN
see diagram
Typical release time range
3 ms ... 20 ms
Contact type
2 changeover contacts
Min. switching current
10 mA (At 5 V)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V2 (Housing)
Stripping length
8 mm
Standards/regulations
DIN EN 50178
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Mechanical service life
approx. 107 cycles
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Rated surge voltage
6 kV
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 4.0
EC001437
ETIM 7.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
UNSPSC 11
39121515