2903328 Phoenix Contact Control Relays

Product Details

• Width
  16 mm
• Degree of protection
  IP20 (Relay base)
• Mains frequency
  50/60 Hz
• Note
  the following values are applicable if a gold layer is destroyed
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Typical response time
  3 ms ... 12 ms
• Protective circuit
  Varistor
• Type of switch contact
  Single contact
• Switching capacity
  2 A (at 24 V, DC13)
• Service life, electrical
  see diagram
• Connection name
  Contact side
• Conductor cross section flexible
  0.14 mm² ... 1.5 mm²
• Overvoltage category
  III
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.1
  27371100
• ECLASS 6.0
  27371600
• ETIM 7.0
  EC001437
• UNSPSC 13.2
  39122334
• UNSPSC 21.0
  39122334
• Type of note
  Notes on operation
Height
93 mm
Input voltage range in reference to UN
see diagram
Typical release time range
3 ms ... 20 ms
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.96 W
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil voltage
120 V AC
Contact material
AgNi
Maximum inrush current
50 mA
Operating mode
100% operating factor
Connection method
Push-in connection
Stripping length
8 mm
Identification
ISA-S71.04. G3 Harsh Group
Pollution degree
2
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ECLASS 7.0
27371601
ECLASS 9.0
27371601
UNSPSC 11
39121515
UNSPSC 12.01
39121515
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
75 mm
Nominal input voltage UN
120 V AC
Typical input current at UN
8 mA
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
5 V (at 10 mA)
Limiting continuous current
12 A (20 ms, N/O contacts)
Flammability rating according to UL 94
V2 (Housing)
Mechanical service life
approx. 107 cycles
Mounting position
any
Rated surge voltage
6 kV
Standards/regulations
DIN EN 50178
Designation
Corrosive gas test
ECLASS 4.0
27371100
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
Contact type
2 changeover contacts
Min. switching current
10 mA (At 5 V)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section AWG
26 ... 16 (solid)
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334