2903327 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  93 mm
• Depth
  75 mm
• Mains frequency
  50/60 Hz
• Operating voltage display
  Yellow LED
• Min. switching current
  10 mA (At 5 V)
• Service life, electrical
  see diagram
• Connection method
  Push-in connection
• Rated surge voltage
  6 kV
• Type of note
  Notes on operation
• Note
  the following values are applicable if a gold layer is destroyed
• Width
  16 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage UN
  230 V AC
• Typical release time range
  3 ms ... 20 ms
• Coil voltage
  230 V AC
• Contact type
  2 changeover contacts
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Input voltage range in reference to UN
  see diagram
• Typical input current at UN
  6 mA
Maximum switching voltage
250 V AC/DC
Switching capacity
2 A (at 24 V, DC13)
Flammability rating according to UL 94
V2 (Housing)
Connection name
Contact side
Standards/regulations
DIN EN 50178
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 6.0
EC001437
UNSPSC 12.01
39121516
Contact material
AgNi
Minimum switching voltage
5 V (at 10 mA)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Overvoltage category
III
ECLASS 4.1
27371100
ECLASS 9.0
27371601
UNSPSC 6.01
30211917
UNSPSC 21.0
39122334
Degree of protection
IP20 (Relay base)
Typical response time
3 ms ... 12 ms
Protective circuit
Varistor
Type of switch contact
Single contact
Maximum inrush current
50 mA
Operating mode
100% operating factor
Mounting position
any
Conductor cross section AWG
26 ... 16 (solid)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 7.0901
39121516
UNSPSC 19.0
39122334
Limiting continuous current
12 A (20 ms, N/O contacts)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Mechanical service life
approx. 107 cycles
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 11
39121516
UNSPSC 20.0
39122334
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 18.0
39122334