2903324 Phoenix Contact Control Relays

Product Details

• Width
  27 mm
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Coil voltage
  125 V DC
• Operating voltage display
  Yellow LED
• Contact material
  AgNi
• Switching capacity
  2 A (at 24 V, DC13)
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Conductor cross-section solid (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
• Rated surge voltage
  4 kV
• Overvoltage category
  III
• ECLASS 4.1
  27371100
• ETIM 3.0
  EC001437
• UNSPSC 11
  39121515
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range in reference to UN
  see diagram
• Typical release time
  14 ms
• Type of switch contact
  Single contact
• Minimum switching voltage
  5 V (At 24 mA)
• Flammability rating according to UL 94
  V2 (Housing)
• Height
  89 mm
Typical input current at UN
7.5 mA
Typical response time
13 ms
Limiting continuous current
10 A (see diagram)
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.5 mm² ... 4 mm²
Standards/regulations
DIN EN 50178
Insulation
Basic insulation
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ETIM 2.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 13.2
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
IP20 (Relay base)
Maximum switching voltage
250 V AC/DC
Mounting position
any
Conductor cross section AWG
20 ... 10 (solid)
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ECLASS 5.0
27371600
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
Maximum inrush current
30 A (20 ms, N/O contacts)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Operating mode
100% operating factor
Stripping length
8 mm
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Pollution degree
2 (Rated voltage of 230/400 V)
ECLASS 4.0
27371100
ECLASS 6.0
27371600
UNSPSC 20.0
39122334
Depth
75 mm
Nominal input voltage UN
125 V DC
Protective circuit
Damping diode
Contact type
2 changeover contacts
Min. switching current
5 mA (at 24 V)
Connection name
Contact side
Conductor cross section solid
0.5 mm² ... 4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
Mechanical service life
approx. 2x 107 cycles
Connection method
Screw connection
Torque
0.5 Nm ... 0.6 Nm
Rated insulation voltage
250 V AC
ECLASS 7.0
27371601
UNSPSC 7.0901
39121515