2903315 Phoenix Contact Control Relays

Product Details

• Assembly instructions
  In rows with zero spacing
• Connection in acc. with standard
  CSA
• Rated surge voltage
  4 kV
• Overvoltage category
  III
• ECLASS 11.0
  27371601
• ECLASS 4.1
  27371100
• ETIM 6.0
  EC001437
• UNSPSC 11
  39121516
• UNSPSC 19.0
  39122334
• Nominal input voltage UN
  24 V DC
• Coil voltage
  24 V DC
• Switching capacity
  2 A (at 24 V, DC13)
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 1.5 mm²
• Rated insulation voltage
  250 V AC
• Designation
  Corrosive gas test
• ECLASS 4.0
  27371100
• ECLASS 7.0
  27371601
• ETIM 2.0
  EC001437
• UNSPSC 12.01
  39121516
UNSPSC 21.0
39122334
Typical response time
13 ms
Minimum switching voltage
5 V (At 24 mA)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Connection method
Push-in connection
Conductor cross section AWG
26 ... 16 (solid)
Pollution degree
2 (Rated voltage of 230/400 V)
ECLASS 10.0.1
27371601
ETIM 3.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
Input voltage range in reference to UN
see diagram
Contact material
AgNi
Limiting continuous current
10 A (see diagram)
Mechanical service life
approx. 2x 107 cycles
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
Maximum switching voltage
250 V AC/DC
Operating mode
100% operating factor
Connection name
Contact side
Insulation
Basic insulation
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 20.0
39122334
Height
96 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Power dissipation for nominal condition
1.01 W
Min. switching current
5 mA (at 24 V)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Damping diode
Contact type
2 changeover contacts
Maximum inrush current
30 A (20 ms, N/O contacts)
Stripping length
8 mm
Width
31 mm
Typical input current at UN
42 mA
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Depth
75 mm
Degree of protection
IP20 (Relay base)
Typical release time
14 ms
Operating voltage display
Yellow LED
Type of switch contact
Single contact
ECLASS 6.0
27371600