2903313 Phoenix Contact Control Relays

Product Details

• Height
  96 mm
• Typical response time
  5 ms ... 15 ms
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC
• Interrupting rating (ohmic load) max.
  204 W (at 24 V DC)
• Mechanical service life
  approx. 2x 107 cycles
• Assembly instructions
  In rows with zero spacing
• Conductor cross section AWG
  26 ... 16 (solid)
• Rated insulation voltage
  250 V AC
• Rated surge voltage
  4 kV
• ECLASS 4.0
  27371100
• ECLASS 6.0
  27371600
• ECLASS 7.0
  27371601
• UNSPSC 6.01
  30211916
• UNSPSC 13.2
  39122334
• Depth
  75 mm
• Nominal input voltage UN
  24 V AC
• Typical release time range
  5 ms ... 20 ms
• Power dissipation for nominal condition
  1.58 W
• Limiting continuous current
  8.5 A (see diagram)
Minimum switching voltage
5 V (At 24 mA)
Mounting position
any
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27371100
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
Degree of protection
IP20 (Relay base)
Typical input current at UN
66 mA
Coil voltage
24 V AC
Contact material
AgNi
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Stripping length
8 mm
Pollution degree
2 (Rated voltage of 230/400 V)
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 7.0
EC001437
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 50 °C
Mains frequency
50/60 Hz
Type of switch contact
Single contact
Switching capacity
2 A (at 24 V, DC13)
Operating mode
100% operating factor
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Insulation
Basic insulation
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 11
39121515
UNSPSC 21.0
39122334
Width
31 mm
Input voltage range in reference to UN
see diagram
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Contact type
2 changeover contacts
Protective circuit
Varistor
Maximum inrush current
30 A (20 ms, N/O contacts)
Min. switching current
5 mA (at 24 V)
Flammability rating according to UL 94
V2 (Housing)
Connection name
Contact side
Connection in acc. with standard
CSA
Identification
ISA-S71.04. G3 Harsh Group
Designation
Corrosive gas test
Overvoltage category
III
ECLASS 5.0
27371600
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
ETIM 2.0
EC001437