2903304 Phoenix Contact Control Relays

Product Details

• Width
  31 mm
• Maximum altitude
  ≤ 2000 m
• Typical input current at UN
  6.5 mA
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• ETIM 7.0
  EC001437
• UNSPSC 20.0
  39122334
• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
• Typical release time range
  5 ms ... 20 ms
• ETIM 2.0
  EC001437
• UNSPSC 6.01
  30211917
• UNSPSC 19.0
  39122334
• Height
  96 mm
• Nominal input voltage UN
  230 V AC
• Mains frequency
  50/60 Hz
• Contact type
  4 changeover contacts
• ECLASS 7.0
  27371601
• UNSPSC 11
  39121516
• UNSPSC 18.0
  39122334
Ambient temperature (operation)
-40 °C ... 50 °C
Degree of protection
IP20 (Relay base)
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 7.0901
39121516
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Operating voltage display
Yellow LED
Minimum switching voltage
5 V (At 24 mA)
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 16 (solid)
Overvoltage category
II
ECLASS 4.1
27371100
Typical response time
5 ms ... 15 ms
Maximum switching voltage
250 V AC/DC
Maximum inrush current
16 A (20 ms, N/O contacts)
Mechanical service life
approx. 2x 107 cycles
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27371601
Coil voltage
230 V AC
Type of switch contact
Single contact
Operating mode
100% operating factor
Mounting position
any
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Rated surge voltage
2.5 kV
ECLASS 4.0
27371100
ECLASS 6.0
27371600
Protective circuit
Varistor
Contact material
AgNi
Limiting continuous current
5 A (see diagram)
Interrupting rating (ohmic load) max.
120 W (at 24 V DC)
Connection method
Push-in connection
Rated insulation voltage
250 V AC
Designation
Corrosive gas test
ECLASS 11.0
27371601
ECLASS 5.1
27371600
Power dissipation for nominal condition
1.5 W
Min. switching current
5 mA (at 24 V)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V2 (Housing)
Connection in acc. with standard
CSA
Insulation
Basic insulation
Pollution degree
2
ECLASS 5.0
27371600
ETIM 3.0
EC001437