2903295 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Mains frequency
  50/60 Hz
• Protective circuit
  Varistor
• Power dissipation for nominal condition
  2.99 W
• Connection name
  Contact side
• Conductor cross section AWG
  26 ... 16 (solid)
• Insulation
  Basic insulation
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 5.0
  27371600
• ECLASS 9.0
  27371601
• ETIM 7.0
  EC001437
• UNSPSC 13.2
  39122334
• Width
  40 mm
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Input voltage range in reference to UN
  see diagram
• Typical release time range
  5 ms ... 20 ms
• Contact type
  2 changeover contacts
• Maximum inrush current
  30 A (20 ms, N/O contacts)
• Maximum switching voltage
  250 V AC/DC
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
approx. 2x 107 cycles
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Rated surge voltage
4 kV
ECLASS 11.0
27371601
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
Pollution degree
2
ECLASS 4.0
27371100
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 19.0
39122334
UNSPSC 21.0
39122334
Depth
90 mm
Nominal input voltage UN
230 V AC
Typical input current at UN
13 mA
Coil voltage
230 V AC
Contact material
AgNi
Min. switching current
10 mA (at 24 V)
Interrupting rating (ohmic load) max.
168 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Operating mode
100% operating factor
Connection method
Push-in connection
Connection in acc. with standard
CSA
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ECLASS 7.0
27371601
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Height
103 mm
Degree of protection
IP20 (Relay base)
Typical response time
5 ms ... 15 ms
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Minimum switching voltage
10 V (At 24 mA)
Limiting continuous current
7 A (see diagram)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Rated insulation voltage
250 V AC
Designation
Corrosive gas test
ECLASS 6.0
27371600
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334