2903288 Phoenix Contact Control Relays

Product Details

• Pollution degree
  2
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Typical release time
  20 ms
• Protective circuit
  Damping diode
• Min. switching current
  10 mA (at 24 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Conductor cross section solid
  0.5 mm² ... 4 mm²
• Stripping length
  8 mm
• Rated insulation voltage
  250 V AC
• China RoHS
  Environmentally Friendly Use Period = 50 years
• UNSPSC 21.0
  39122334
• Width
  44 mm
• Degree of protection
  IP20 (Relay base)
• Power dissipation for nominal condition
  1.34 W
• Maximum switching voltage
  440 V AC
• Maximum inrush current
  50 A (20 ms, N/O contacts)
• 3-phase motor load
  1500 W
• Depth
  91 mm
• Typical response time
  20 ms
• Coil voltage
  24 V DC
Contact material
AgNi
Minimum switching voltage
10 V (At 24 mA)
Motor load according to UL 508
1/3 HP, 120 V AC (single-phase AC motor)
Operating mode
100% operating factor
Connection method
Screw connection
Rated surge voltage
4 kV
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
Height
96 mm
Nominal input voltage UN
24 V DC
Typical input current at UN
56 mA
Contact type
3 changeover contacts
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Connection name
Contact side
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm�� ... 2.5 mm²
Insulation
Basic insulation
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 12.01
39121515
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range in reference to UN
see diagram
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Limiting continuous current
10 A (see diagram)
Flammability rating according to UL 94
V2 (Housing)
Assembly instructions
In rows with zero spacing
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Conductor cross section AWG
20 ... 10 (solid)
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 19.0
39122334
Mechanical service life
approx. 107 cycles
Conductor cross section flexible
0.5 mm² ... 4 mm²
Standards/regulations
DIN EN 50178
Designation
Corrosive gas test
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334