2903281 Phoenix Contact Control Relays

Product Details

• Width
  43 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range in reference to UN
  see diagram
• Typical input current at UN
  56 mA
• Contact material
  AgNi
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Operating mode
  100% operating factor
• Min. switching current
  10 mA (at 24 V)
• Mechanical service life
  approx. 107 cycles
• Connection name
  Contact side
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Pollution degree
  2
• Designation
  Corrosive gas test
• ECLASS 4.0
  27371100
• ECLASS 9.0
  27371601
• ETIM 6.0
  EC001437
• UNSPSC 18.0
  39122334
• UNSPSC 13.2
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Depth
90 mm
Nominal input voltage UN
24 V DC
Typical release time
20 ms
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Limiting continuous current
11 A (see diagram)
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Height
111 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Degree of protection
IP20 (Relay base)
Coil voltage
24 V DC
Power dissipation for nominal condition
1.34 W
Protective circuit
Damping diode
Minimum switching voltage
10 V (At 24 mA)
Single-phase motor load
800 W
Connection method
Push-in connection
Connection in acc. with standard
CSA
Insulation
Basic insulation
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 11
39121515
Typical response time
20 ms
Contact type
2 changeover contacts
Maximum switching voltage
440 V AC
Maximum inrush current
50 A (20 ms, N/O contacts)
Motor load according to UL 508
1/3 HP, 120 V AC (single-phase AC motor)
Flammability rating according to UL 94
V2 (Housing)
Stripping length
10 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
ECLASS 4.1
27371100
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 19.0
39122334
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14 (solid)
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 21.0
39122334
Rated insulation voltage
250 V AC
Rated surge voltage
4 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 7.0
27371601
UNSPSC 12.01
39121515
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334