2903280 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 40 °C
• Typical release time range
  5 ms ... 20 ms
• Power dissipation for nominal condition
  2.88 W
• Height
  111 mm
• Degree of protection
  IP20 (Relay base)
• Typical response time
  5 ms ... 25 ms
• Contact type
  2 changeover contacts
• Maximum inrush current
  50 A (20 ms, N/O contacts)
• Motor load according to UL 508
  1/3 HP, 120 V AC (single-phase AC motor)
• Mechanical service life
  approx. 107 cycles
• Assembly instructions
  In rows with zero spacing
• Connection in acc. with standard
  CSA
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 5.0
  27371600
• ECLASS 7.0
  27371601
• ETIM 4.0
  EC001437
• UNSPSC 12.01
  39121515
• UNSPSC 21.0
  39122334
• Depth
  90 mm
• Nominal input voltage UN
  120 V AC
Typical input current at UN
24 mA
Protective circuit
Varistor
Type of switch contact
Single contact
Minimum switching voltage
10 V (At 24 mA)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Stripping length
10 mm
Conductor cross section AWG
26 ... 14 (solid)
Rated surge voltage
4 kV
Rated insulation voltage
250 V AC
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ECLASS 9.0
27371601
UNSPSC 11
39121515
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil voltage
120 V AC
Min. switching current
10 mA (at 24 V)
Single-phase motor load
800 W
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
Width
43 mm
Input voltage range in reference to UN
see diagram
Mains frequency
50/60 Hz
Operating voltage display
Yellow LED
Contact material
AgNi
Limiting continuous current
9 A (see diagram)
Flammability rating according to UL 94
V2 (Housing)
Mounting position
any
Insulation
Basic insulation
Designation
Corrosive gas test
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
Maximum switching voltage
440 V AC
Switching capacity
2 A (at 24 V, DC13)
Interrupting rating (ohmic load) max.
216 W (at 24 V DC)
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 4.1
27371100
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334