2903275 Phoenix Contact Control Relays

Product Details

• Height
  111 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  70 mA
• Typical release time
  20 ms
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Nominal input voltage UN
  24 V DC
• Operating voltage display
  Yellow LED
• Type of switch contact
  Single contact
• Limiting continuous current
  10 A (see diagram)
• Switching capacity
  1 A (at 24 V, DC13)
• Mechanical service life
  approx. 107 cycles
• Connection name
  Contact side
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Standards/regulations
  DIN EN 50178
• Rated surge voltage
  4 kV
• Designation
  Corrosive gas test
• ECLASS 10.0.1
  27371601
• ECLASS 4.1
  27371100
• ETIM 2.0
  EC001437
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Maximum inrush current
50 A (20 ms, N/O contacts)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14 (solid)
Insulation
Basic insulation
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334
Width
43 mm
Degree of protection
IP20 (Relay base)
Input voltage range in reference to UN
see diagram
Coil voltage
24 V DC
Power dissipation for nominal condition
1.68 W
Minimum switching voltage
10 V (At 24 mA)
Motor load according to UL 508
1/3 HP, 120 V AC (single-phase AC motor)
Mounting position
any
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
2
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
Depth
90 mm
Typical response time
20 ms
Protective circuit
Damping diode
Contact type
3 N/O contacts
Contact material
AgNi
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Connection method
Push-in connection
Connection in acc. with standard
CSA
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 6.0
27371600
ECLASS 9.0
27371601
UNSPSC 11
39121515
UNSPSC 12.01
39121515
Maximum switching voltage
440 V AC
Min. switching current
10 mA (at 24 V)
Operating mode
100% operating factor
Stripping length
10 mm
Rated insulation voltage
250 V AC
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334