2902969 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Ambient temperature (operation)
  -20 °C ... 60 °C
• Input voltage range in reference to UN
  0.8 ... 1.2
• Switching threshold "0" signal in reference to UN
  < 0.4
• Typical turn-off time
  2 µs
• Transmission frequency
  100 kHz
• Output voltage range
  4 V DC ... 30 V DC
• Voltage drop at max. limiting continuous current
  < 0.5 V
• Mounting position
  any
• Connection name
  Output side
• Stripping length
  8 mm
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Insulation
  Basic insulation
• Overvoltage category
  II
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.1
  27371100
• ECLASS 6.0
  27371600
• ETIM 2.0
  EC001504
• ETIM 6.0
  EC001504
• UNSPSC 7.0901
  39121542
UNSPSC 12.01
39121542
UNSPSC 19.0
39122326
UNSPSC 21.0
39122326
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
86 mm
Ambient temperature (storage/transport)
-25 °C ... 75 °C
Nominal input voltage UN
5 V DC
Typical input current at UN
7 mA
Operating voltage display
Yellow LED
Surge voltage protection
> 35 V
Designation
Corrosive gas test
Limiting continuous current
50 mA
Test voltage
2.5 kVrms (50 Hz, 1 min., input/output)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Rated insulation voltage
50 V DC
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371604
ECLASS 5.1
27371000
ECLASS 7.0
27371604
ETIM 4.0
EC001504
ETIM 7.0
EC001504
UNSPSC 11
39121542
UNSPSC 18.0
39122326
UNSPSC 20.0
39122326
ECLASS 5.0
27371000
ECLASS 9.0
27371604
Width
6.2 mm
Degree of protection
IP20
Input voltage range
4 V DC ... 6 V DC
Switching threshold "1" signal in reference to UN
> 0.8
Typical response time
1.5 µs
Type of protection
Reverse polarity protection
Power dissipation for nominal condition
0.04 W
Quiescent current
4.3 mA
Output circuit
3-conductor, ground-referenced
Operating mode
100% operating factor
Connection method
Push-in connection
Standards/regulations
DIN EN 50178
Rated surge voltage
0.5 kV
Pollution degree
2
ECLASS 10.0.1
27371604
ECLASS 4.0
27371100
ETIM 3.0
EC001504
UNSPSC 6.01
30211916
UNSPSC 13.2
39122326