2902851 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Electromagnetic compatibility
  Conformance with EMC directive
• Certificate
  DNV GL TAA00002R0
• ECLASS 4.1
  27200200
• UNSPSC 19.0
  41112105
• Height
  93.1 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Degree of protection
  IP20
• Max. output current
  24.6 mA
• Power consumption
  ≤ 700 mW (at IOUT = 20 mA, 9.6 V DC, load 500 Ω)
• Stripping length
  12 mm
• Maximum temperature coefficient
  ≤ 0.01 %/K
• Cold point error, max.
  < 3 K
• Rated insulation voltage
  50 V AC/DC
• Housing material
  PBT
• Width
  6.2 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Temperature measuring range
  -250 °C ... 2500 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 1350°C via DIP switches)
• Max. current consumption
  72 mA
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Screw thread
  M3
Protective circuit
Transient protection
Degree of pollution
2
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Temperature
B
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27210129
ECLASS 7.0
27200206
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
101.2 mm
Voltage output signal
0 V ... 10 V
Load/output load voltage output
≥ 10 kΩ
Ripple
< 20 mVPP
Transmission error thermocouples
0.1 % * 600 K / set measuring range; 0.1 % > 600 K (E, J, K, N, T, L, U, M Gost, L Gost)
Overvoltage category
II
Color
green
Mounting position
any
Identification
UL 508 Listed
EMC
A
ECLASS 4.0
27200200
ETIM 2.0
EC001446
ETIM 7.0
EC002919
UNSPSC 13.2
41112105
UNSPSC 20.0
41112105
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Sensor types that can be used (TC)
B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
Number of outputs
1
Current output signal
0 mA ... 20 mA
Short-circuit current
< 31.5 mA
Typical current consumption
< 27 mA (at 24 V DC)
Typical cold point errors
< 2 K
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Enclosure
Required protection according to the Rules shall be provided upon installation on board
UNSPSC 7.0901
39121008
Designation
Shipbuilding approval
ECLASS 5.1
27200200
ECLASS 9.0
27210129
Maximum altitude
≤ 2000 m
Configurable/programmable
Yes
Max. output voltage
approx. 12.3 V
Load/output load current output
< 500 Ω (at 20 mA)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Connection method
Screw connection
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Electrical isolation
Basic insulation according to EN 61010
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
Humidity
B
ECLASS 10.0.1
27210129
ECLASS 5.0
27200200
ETIM 4.0
EC001446
UNSPSC 11
39121008
Typical deviation from the measuring range final value
0.02 %
Vibration
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27200200
ETIM 3.0
EC001446
UNSPSC 6.01
30211506
UNSPSC 18.0
41112105
UNSPSC 21.0
41112105
Conductor cross section AWG
26 ... 12
Status display
LED red
ETIM 6.0
EC002919
UNSPSC 12.01
39121008