2902832 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Output name
  Voltage output / current output
• Max. output current
  24.6 mA
• Ripple
  < 20 mVPP
• Typical current consumption
  < 28 mA (at IOUT = 20 mA, 24 V DC, load 500 Ω)
• Conductor cross section AWG
  26 ... 12
• Electrical isolation
  Basic insulation according to EN 61010
• Test voltage, input/output/supply
  1.5 kV (50 Hz, 1 min.)
• Housing material
  PBT
• Standards/regulations
  EN 61000-4-6
• Identification
  UL 508 Listed
• Vibration
  B
• REACh SVHC
  Lead 7439-92-1
• ETIM 4.0
  EC002653
• UNSPSC 11
  39121008
• UNSPSC 13.2
  39121008
• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Degree of protection
  IP20
• Available input sources
  NPN/PNP transistor outputs
Voltage output signal
0 V ... 5 V
Load/output load current output
500 Ω (at 20 mA)
Power consumption
< 800 mW (at IOUT = 20 mA, 9.6 V DC, load 500 Ω)
Stripping length
12 mm
Transmission error in the set measuring range
0.1 %
Protective circuit
Transient protection
Rated insulation voltage
50 V AC/DC
Noise emission
EN 61000-6-4
Typical deviation from the measuring range final value
0.3 %
ECLASS 10.0.1
27210120
ECLASS 5.0
27210100
ECLASS 9.0
27210120
ETIM 6.0
EC002653
UNSPSC 18.0
39121008
UNSPSC 20.0
39121008
Ambient temperature (operation)
-20 °C ... 65 °C
Configurable/programmable
Yes
Max. input amplitude
30 V (incl. DC voltage)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Screw thread
M3
No. of channels
1
Operating elements
Press/slide button
Electromagnetic compatibility
Conformance with EMC directive
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Certificate
DNV GL TAA00002R0
ECLASS 11.0
27210120
ECLASS 5.1
27210100
ECLASS 6.0
27210100
UNSPSC 7.0901
39121008
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
101.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Frequency measuring range
0.002 Hz ... 20 kHz (DIP switch)
Number of outputs
1
Current output signal
0 mA ... 20 mA
Load/output load voltage output
≥ 10 kΩ
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Status display
LED red
Degree of pollution
2
Color
green
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Designation
Shipbuilding approval
Humidity
B
EMC
A
ECLASS 4.1
27210100
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 12.01
39121008
UNSPSC 19.0
39121008
Height
93.1 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Frequency input
Frequency input
Max. output voltage
approx. 12.3 V
Step response (0–99%)
< 35 ms (At f > 500 Hz)
Connection method
Screw connection
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum temperature coefficient
0.01 %/K
Overvoltage category
II
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
UNSPSC 6.01
30211506
UNSPSC 21.0
39121008