2902822 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -20 °C ... 65 °C
• Ripple
  < 20 mVPP
• Connection method
  Screw connection
• Maximum temperature coefficient
  < 0.01 %/K
• Electrical isolation
  Basic insulation according to EN 61010
• Color
  green
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• ECLASS 11.0
  27040701
• ECLASS 5.0
  27210100
• UNSPSC 11
  39121008
• UNSPSC 19.0
  39121004
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Voltage input signal
  9.6 V DC ... 30 V DC
• Power consumption
  < 600 mW (at 24 V IN)
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Setting range comparison
  ± 300 mV
• Test voltage input/output
  1.5 kV (50 Hz, 1 min.)
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
Standards/regulations
EN 61000-4-6
ECLASS 4.1
27210100
ETIM 6.0
EC002540
UNSPSC 13.2
39121004
Height
93.1 mm
Max. output voltage
10 V DC
Nominal supply voltage
24 V DC
Stripping length
12 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Temperature coefficient, typical
< 0.002 %/K
Electromagnetic compatibility
Conformance with EMC directive
Mounting position
any
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27210100
ECLASS 9.0
27040701
UNSPSC 7.0901
39121008
UNSPSC 20.0
39121004
UNSPSC 18.0
39121004
Width
6.2 mm
Maximum altitude
≤ 2000 m
Short-circuit current
approx. 32 mA
Max. current consumption
< 25 mA (10 V output with 30 mA load at 24 V DC IN)
Conductor cross section AWG
26 ... 12
Degree of pollution
2
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Comments
Criterion B
ECLASS 10.0.1
27040701
ECLASS 6.0
27049000
ECLASS 7.0
27049002
UNSPSC 6.01
30211506
UNSPSC 21.0
39121004
Depth
101.2 mm
Output current
≤ 30 mA
Configurable/programmable
Yes, preconfigured
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Screw thread
M3
Maximum transmission error
≤ 0.1 % (of final value)
Overvoltage category
II
Rated insulation voltage
50 V AC/DC
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
REACh SVHC
Lead 7439-92-1
Designation
Conducted interferences
ECLASS 4.0
27210100
ETIM 4.0
EC002540
ETIM 7.0
EC002540
UNSPSC 12.01
39121008