2902065 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Height
  109.81 mm
• Transmitter supply voltage
  10 V
• Output voltage with wire break
  13.5 V
• Stripping length
  10 mm
• Maximum temperature coefficient
  < 0.01 %/K
• Maximum transmission error
  ≤ 0.1 % (of final value)
• Noise emission
  EN 61000-6-4
• Electromagnetic compatibility
  Conformance with EMC directive
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• DNV GL-Vibration
  A
• ECLASS 4.0
  27210100
• ECLASS 6.0
  27049000
• ETIM 7.0
  EC002540
• Width
  6.2 mm
• Degree of protection
  IP20 (not assessed by UL)
• Short-circuit current
  > 32 mA
• Typical current consumption
  < 42 mA (24 V DC)
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Overvoltage category
  II
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Conformance
CE-compliant
DNV GL-Humidity
B
Ambient temperature (operation)
-40 °C ... 70 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Max. output current
20 mA
Configurable/programmable
Yes
Load/output load current output
≤ 600 Ω (20 mA)
Power consumption
< 1.1 W (9.6 V DC)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Designation
GB Standard
DNV GL-Temperature
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27210100
UNSPSC 6.01
30211506
ETIM 6.0
EC002540
UNSPSC 11
39121008
UNSPSC 19.0
39121004
Depth
119.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Ripple
< 20 mVPP (at 600 Ω)
Conductor cross section AWG
24 ... 12 (flexible)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27210100
ECLASS 5.1
27210100
UNSPSC 7.0901
39121008
UNSPSC 13.2
39121004
UNSPSC 21.0
39121004
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Degree of pollution
2
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Standards/regulations
GB 3836.1
ECLASS 9.0
27040701
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. output voltage
10 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Connection method
Push-in connection
Rated insulation voltage
300 V (effective)
Mounting position
any
ATEX
 II 3 G Ex nA IIC T4 Gc X
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 10.0.1
27040701
ECLASS 7.0
27049002
ETIM 4.0
EC002540
UNSPSC 12.01
39121008
UNSPSC 20.0
39121004
Voltage input signal
9.6 V DC ... 30 V DC
Output current
≤ 30 mA
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
UL, USA/Canada
UL 508 Listed
DNV GL-EMC
A
ECLASS 11.0
27040701
UNSPSC 18.0
39121004