2902043 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Width
  6.2 mm
• Depth
  119.2 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Voltage input signal
  0 V ... 10 V
• Ripple
  < 20 mVPP (at 10 kΩ)
• Max. output voltage
  11 V
• Transmission Behavior
  1:1 to input signal
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Maximum temperature coefficient
  0.01 %/K
• Temperature coefficient, typical
  0.01 %/K
• Overvoltage category
  II
• Rated insulation voltage
  300 V (effective)
• Housing material
  PBT
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Designation
  Shipbuilding approval
• Certificate
  DNV GL TAA00002UA
• EMC
  A
• ECLASS 4.1
  27210100
• ECLASS 9.0
  27210120
• ETIM 6.0
  EC002653
UNSPSC 11
39121004
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input resistance of voltage input
approx. 1 MΩ
Nominal supply voltage
24 V DC
Connection method
Push-in connection
Protective circuit
Transient protection
Electromagnetic compatibility
Conformance with EMC directive
Standards/regulations
EN 61000-4-6
Humidity
B
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27210100
ECLASS 11.0
27210120
ECLASS 5.1
27210100
UNSPSC 13.2
39121008
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
IP20 (not assessed by UL)
Number of outputs
1
Typical current consumption
25 mA (24 V DC)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Step response (10-90%)
approx. 10 ms
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Temperature
B
Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27210100
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121008
Ambient temperature (operation)
-40 °C ... 70 °C
Configurable/programmable
no
Voltage output signal
0 V ... 10 V
Short-circuit current
< 15 mA
Power consumption
≤ 200 mW (at 9.6 V DC)
No. of channels
1
Conductor cross section AWG
24 ... 12 (flexible)
Degree of pollution
2
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.0
27210100
ETIM 4.0
EC002653
UNSPSC 18.0
39121008
UNSPSC 20.0
39121008
Height
109.81 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Number of inputs
1
Load/output load voltage output
≥ 10 kΩ
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Stripping length
10 mm
Maximum transmission error
0.1 % (of final value)
Limit frequency (3 dB)
approx. 30 Hz
Color
gray
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Identification
UL 508 Listed
ECLASS 10.0.1
27210120
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 12.01
39121004
UNSPSC 21.0
39121008