2902033 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Height
  109.81 mm
• Maximum altitude
  ≤ 2000 m
• Degree of protection
  IP20 (not assessed by UL)
• Input resistance of voltage input
  > 120 kΩ
• Contact type
  1 changeover contact
• Setting range of the response delay
  0 s ... 10 s (can be set freely via software)
• Typical current consumption
  40 mA (12 V DC)
• Connection method
  Screw connection
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Status display
  Yellow LED (switching output)
• Overvoltage category
  II
• Noise emission
  EN 61000-6-4
• Designation
  Shipbuilding approval
• Depth
  119.2 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• max. input voltage
  12 V
• Contact material
  AgSnO2, hard gold-plated
• Mechanical service life
  2x 107 cycles
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Max. switching current
  6 A AC (250 V AC)
Torque
0.5 Nm ... 0.6 Nm
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Degree of pollution
2
Electromagnetic compatibility
Conformance with EMC directive
Width
6.2 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Configurable/programmable
Yes
Current input signal
0 mA ... 20 mA (via DIP switch)
Max. input current
24 mA
Min. switching current
100 mA (12 V DC)
Power consumption
≤ 0.5 W
Conductor cross section AWG
24 ... 12 (flexible)
No. of channels
1
Switching point accuracy
< 0.1 %
Color
gray
ECLASS 5.0
27210100
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Maximum switching voltage
250 V AC
Nominal supply voltage
24 V DC
Screw thread
M3
Maximum transmission error
0.1 % (of final value)
Rated insulation voltage
300 V (effective)
Housing material
PBT
Temperature
B
EMC
A
ECLASS 6.0
27210100
ETIM 7.0
EC002654
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
ECLASS 11.0
27210122
Output name
Relay output
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
ECLASS 5.1
27210100
UNSPSC 7.0901
39121008
UNSPSC 19.0
39121008
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Voltage input signal
0 V ... 10 V (via DIP switch)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Identification
UL 508 Listed
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27210122
ECLASS 9.0
27210122
UNSPSC 21.0
39121008
Maximum temperature coefficient
0.01 %/K
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Certificate
DNV GL TAA000021E
Humidity
B
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC002654
UNSPSC 11
39121008
UNSPSC 12.01
39121008
Limiting continuous current
6 A AC
Internal hysteresis
can be set freely via software
Stripping length
10 mm
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.0
27210100
ECLASS 4.1
27210100
UNSPSC 6.01
30211506
UNSPSC 18.0
39121008
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Vibration
A
ECLASS 10.0.1
27210122
ETIM 6.0
EC002654
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008