2902030 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Degree of protection
  IP20 (not assessed by UL)
• Input resistance of voltage input
  approx. 1 MΩ
• Ripple
  < 20 mVPP (at 600 Ω)
• Stripping length
  10 mm
• Width
  6.2 mm
• Conductor cross section AWG
  24 ... 12 (flexible)
• Temperature coefficient, typical
  0.01 %/K
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• Housing material
  PBT
• Limit frequency (3 dB)
  approx. 30 Hz
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of inputs
  1
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Connection method
  Push-in connection
• Overvoltage category
  II
• Electromagnetic compatibility
  Conformance with EMC directive
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Certificate
  DNV GL TAA00002UA
• Humidity
  B
ECLASS 10.0.1
27210120
ETIM 4.0
EC002653
ECLASS 9.0
27210120
UNSPSC 13.2
39121008
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Configurable/programmable
no
Current output signal
4 mA ... 20 mA
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Maximum temperature coefficient
0.01 %/K
Step response (10-90%)
approx. 10 ms
Rated insulation voltage
300 V (effective)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27210100
ETIM 7.0
EC002653
Height
109.81 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Voltage input signal
0 V ... 10 V
Max. output current
22 mA
Power consumption
≤ 800 mW (at 9.6 V DC)
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Maximum transmission error
0.05 % (of final value)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Color
gray
Mounting position
any
Identification
UL 508 Listed
EMC
A
ECLASS 4.0
27210100
ECLASS 5.1
27210100
UNSPSC 6.01
30211502
UNSPSC 18.0
39121008
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Number of outputs
1
Typical current consumption
25 mA (24 V DC)
Nominal supply voltage
24 V DC
No. of channels
1
Protective circuit
Transient protection
Degree of pollution
2
Designation
Shipbuilding approval
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.0
27210100
ETIM 6.0
EC002653
UNSPSC 12.01
39121004
UNSPSC 21.0
39121008
ECLASS 11.0
27210120
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27210100
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121008
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
ECLASS 7.0
27210120
Noise emission
EN 61000-6-4
UNSPSC 11
39121004
UNSPSC 20.0
39121008