2902015 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• Temperature
  B
• Identification
  UL 508 Listed
• ECLASS 4.0
  27210100
• ECLASS 6.0
  27210100
• UNSPSC 7.0901
  39121008
• Certificate
  DNV GL TAA00002UA
• Humidity
  B
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27210100
• ETIM 6.0
  EC002653
• UNSPSC 12.01
  39121008
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• Housing material
  PBT
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• Designation
  Shipbuilding approval
• Vibration
  A
• ECLASS 11.0
  27210120
• ECLASS 9.0
  27210120
UNSPSC 6.01
30211506
ETIM 7.0
EC002653
UNSPSC 19.0
39121008
Standards/regulations
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210120
EMC
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.1
27210100
ETIM 4.0
EC002653
UNSPSC 11
39121008
UNSPSC 13.2
39121008
Typical current consumption
25 mA (at 24 V DC and in isolator operation)
Stripping length
10 mm
ECLASS 5.1
27210100
ECLASS 7.0
27210120
UNSPSC 18.0
39121008
UNSPSC 20.0
39121008
Current output signal
4 mA ... 20 mA (repeater power supply and isolator operation)
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Current input signal
4 mA ... 20 mA (repeater power supply and isolator operation)
Depth
119.2 mm
Description of the input
Current input (sensor circuit)
Height
109.81 mm
Degree of protection
IP20 (not assessed by UL)
Transmitter supply voltage
> 19.5 V
Max. output current
24 mA
Nominal supply voltage
24 V DC
Connection method
Push-in connection
Color
gray
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Number of inputs
1
Ripple
< 20 mVPP (at 600 Ω)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Mounting position
any
Input resistance current input
approx. 68 Ω (+0.7 V for test diode)
Number of outputs
1
Transmission Behavior
1:1 to input signal
No. of channels
1
Rated insulation voltage
300 V (effective)
Noise emission
EN 61000-6-4
Temperature coefficient, typical
0.0075 %/K
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Ambient temperature (operation)
-40 °C ... 70 °C
Electromagnetic compatibility
Conformance with EMC directive
Output name
Current output
Power consumption
≤ 1400 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Maximum transmission error
0.05 % (of final value in repeater power supply operation)
Limit frequency (3 dB)
approx. 1.75 kHz
Load/output load current output
≤ 600 Ω (at 20 mA)
Step response (10-90%)
< 200 µs (typ.)
Degree of pollution
2
Protective circuit
Transient protection
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Conductor cross section AWG
24 ... 12 (flexible)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Maximum temperature coefficient
0.0075 %/K
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Overvoltage category
II
UNSPSC 21.0
39121008
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)