2902002 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Width
  6.2 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Number of outputs
  1
• Ripple
  < 20 mVPP (at 10 kΩ)
• Power consumption
  ≤ 200 mW (at 9.6 V DC)
• Screw thread
  M3
• Conductor cross section AWG
  24 ... 12 (flexible)
• Maximum temperature coefficient
  0.01 %/K
• Degree of pollution
  2
• Noise emission
  EN 61000-6-4
• Mounting position
  any
• Certificate
  DNV GL TAA00002UA
• EMC
  A
• Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• ECLASS 5.0
  27210100
• ECLASS 7.0
  27210120
• ETIM 6.0
  EC002653
• UNSPSC 6.01
  30211502
• UNSPSC 20.0
  39121008
• Height
  109.81 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Input resistance current input
approx. 63 Ω (+0.7 V for test diode)
Voltage output signal
0 V ... 10 V
Connection method
Screw connection
Maximum transmission error
0.1 % (of final value)
Protective circuit
Transient protection
Rated insulation voltage
300 V (effective)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
Humidity
B
ECLASS 10.0.1
27210120
ECLASS 9.0
27210120
UNSPSC 12.01
39121004
UNSPSC 18.0
39121008
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m
Current input signal
4 mA ... 20 mA
Nominal supply voltage
24 V DC
Typical current consumption
25 mA (24 V DC)
Torque
0.5 Nm ... 0.6 Nm
Limit frequency (3 dB)
approx. 30 Hz
Step response (10-90%)
approx. 10 ms
Housing material
PBT
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Temperature
B
ECLASS 4.1
27210100
ETIM 4.0
EC002653
UNSPSC 13.2
39121008
UNSPSC 7.0901
39121004
Depth
119.2 mm
Degree of protection
IP20 (not assessed by UL)
Configurable/programmable
no
Load/output load voltage output
≥ 10 kΩ
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
No. of channels
1
Overvoltage category
II
Color
gray
Identification
UL 508 Listed
Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27210120
ECLASS 5.1
27210100
UNSPSC 11
39121004
UNSPSC 21.0
39121008
Ambient temperature (operation)
-40 °C ... 70 °C
Number of inputs
1
Max. output voltage
11 V
Short-circuit current
< 15 mA
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Temperature coefficient, typical
0.01 %/K
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Designation
Shipbuilding approval
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ECLASS 6.0
27210100
ETIM 7.0
EC002653
UNSPSC 19.0
39121008