2902001 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• ECLASS 9.0
  27210120
• UNSPSC 11
  39121004
• UNSPSC 21.0
  39121008
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  119.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  IP20 (not assessed by UL)
• Number of outputs
  1
• Short-circuit current
  < 15 mA
• Ripple
  < 20 mVPP (at 10 kΩ)
• Typical current consumption
  25 mA (24 V DC)
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Maximum temperature coefficient
  0.01 %/K
• Step response (10-90%)
  approx. 10 ms
• Overvoltage category
  II
• Electromagnetic compatibility
  Conformance with EMC directive
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Designation
  Shipbuilding approval
Standards/regulations
EN 61000-4-6
EMC
A
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210120
ECLASS 4.1
27210100
ETIM 4.0
EC002653
UNSPSC 7.0901
39121004
UNSPSC 20.0
39121008
Width
6.2 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Number of inputs
1
Configurable/programmable
no
Max. output voltage
11 V
Load/output load voltage output
≥ 10 kΩ
Power consumption
≤ 200 mW (at 9.6 V DC)
Connection method
Push-in connection
Conductor cross section AWG
24 ... 12 (flexible)
Temperature coefficient, typical
0.01 %/K
Limit frequency (3 dB)
approx. 30 Hz
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Noise emission
EN 61000-6-4
Housing material
PBT
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Certificate
DNV GL TAA00002UA
Temperature
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27210100
ECLASS 7.0
27210120
UNSPSC 6.01
30211502
UNSPSC 18.0
39121008
Height
109.81 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Current input signal
0 mA ... 20 mA
Input resistance current input
approx. 63 Ω (+0.7 V for test diode)
Voltage output signal
0 V ... 10 V
Nominal supply voltage
24 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Stripping length
10 mm
No. of channels
1
Maximum transmission error
0.1 % (of final value)
Protective circuit
Transient protection
Degree of pollution
2
Rated insulation voltage
300 V (effective)
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Identification
UL 508 Listed
Vibration
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.0
27210100
ECLASS 6.0
27210100
ETIM 7.0
EC002653
UNSPSC 13.2
39121008
Humidity
B
ECLASS 11.0
27210120
ECLASS 5.1
27210100
ETIM 6.0
EC002653
UNSPSC 12.01
39121004
UNSPSC 19.0
39121008