2901639 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Nominal input voltage UN
  24 V DC
• UNSPSC 18.0
  39122334
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -20 °C ... 60 °C
• Operating voltage display
  Yellow LED
• Note regarding the switch contact
  two integrated relays
• Interrupting rating (ohmic load) max.
  84 W (at 24 V DC)
• Mechanical service life
  2x 107 cycles
• Connection name
  Contact side
• Electromagnetic compatibility
  Conformance with EMC directive
• Standards/regulations
  IEC 60664
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 5.0
  27371600
• ECLASS 5.1
  27371600
• ETIM 7.0
  EC001437
• UNSPSC 6.01
  30211916
• UNSPSC 13.2
  39122334
• UNSPSC 20.0
  39122334
• Height
  80 mm
Degree of protection
IP20 (Relay base)
Protective circuit
Reverse polarity protection Polarity protection diode
Power dissipation for nominal condition
0.17 W
Contact material
AgNi
Limiting continuous current
3.5 A
Flammability rating according to UL 94
V0 (Housing)
Designation
Corrosive gas test
Insulation
Basic insulation
ECLASS 11.0
27371601
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
Ambient temperature (operation)
-20 °C ... 60 °C
Typical input current at UN
7 mA
Typical response time
4 ms
Minimum switching voltage
24 V AC/DC
Test voltage
3 kV AC (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated surge voltage
4 kV
Overvoltage category
III
ECLASS 4.1
27371100
ETIM 2.0
EC001437
ETIM 6.0
EC001437
Depth
86 mm
Typical release time
6 ms
Type of switch contact
Single contact
Min. switching current
5 mA
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
2
Low Voltage Directive
Conformance with Low Voltage Directive
ECLASS 4.0
27371100
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
Contact type
2 N/O contacts (2 relays with 1 N/O contact)
Maximum switching voltage
250 V AC
Mounting position
any
Stripping length
8 mm
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
UNSPSC 11
39121515
UNSPSC 19.0
39122334