2901430 Phoenix Contact Electrical Safety Devices

Product Details

• Depth
  114.5 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Input voltage range in reference to UN
  0.85 ... 1.1
• Typical response time
  50 ms (manual start)
• Typical release time
  20 ms (when controlled via S11/S12)
• Ambient temperature (operation)
  -25 °C ... 55 °C
• Sq. Total current
  72 A2 (ITH2 = I12 + I22 + I32)
• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Output fuse
  10 A gL/gG NEOZED (Enabling current paths)
• pluggable
  Yes
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Screw thread
  M3
• Width
  22.5 mm
• Net weight
  23 g
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Safety Integrity Level (SIL)
  1 (up to SIL 3 depending on the application)
• Designation
  Air clearances and creepage distances between the power circuits
• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• ECLASS 4.0
  40020600
• ECLASS 5.1
  27371900
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
99 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Voltage at input/start and feedback circuit
~ 24 V DC
Typ. starting time with Us
300 ms (when controlled via A1 or S11/S12)
Recovery time
1 s
Max. permissible overall conductor resistance
50 Ω
Contact material
AgSnO2, gold-flashed
Minimum switching voltage
10 V AC/DC
Maximum inrush current
6 A
Switching capacity min.
100 mW
Nominal operating mode
100% operating factor
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Category
1 (up to Cat. 4 depending on the application)
Rated insulation voltage
250 V AC
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371800
ECLASS 7.0
27371819
UNSPSC 18.0
39122205
UNSPSC 19.0
39122205
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage UN
230 V AC
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Typical input current at UN
22 mA
Status display
2 x green LEDs
Operating voltage display
Green LED
Maximum switching frequency
0.5 Hz
Maximum switching voltage
250 V AC/DC
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting position
any
Degree of protection
IP20
Conductor cross-section AWG
24 ... 12
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
1 (up to SILCL 3 depending on the application)
Overvoltage category
III
ECLASS 4.1
40020600
ECLASS 9.0
27371819
ETIM 4.0
EC001449
UNSPSC 11
39121501
UNSPSC 21.0
39122205
Protective circuit
Surge protection Suppressor diode
Contact type
3 enabling current paths
Limiting continuous current
6 A (N/O contact)
Inrush current, minimum
10 mA
Maximum interrupting rating (inductive load)
48 W (at 24 V DC)
Mechanical service life
approx. 107 cycles
Connection method
Screw connection
Stripping length
7 mm
Performance level (PL)
c (up to PL e depending on the application)
Standards/regulations
DIN EN 50178/VDE 0160
ECLASS 11.0
27371819
ECLASS 10.0.1
27371819
ETIM 3.0
EC001449
ETIM 6.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 20.0
39122205
Rated surge voltage/insulation
4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
Shock
15g
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371900
ETIM 7.0
EC001449
UNSPSC 12.01
39121501