2901429 Phoenix Contact Electrical Safety Devices

Product Details

• Ambient temperature (operation)
  -25 °C ... 55 °C
• Depth
  114.5 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Typical response time
  40 ms (man. start)
• Typ. starting time with Us
  330 ms (when controlled via A1)
• Max. permissible overall conductor resistance
  50 Ω
• Contact material
  AgSnO2, + 0.2 µm Au
• Maximum inrush current
  6 A
• Interrupting rating (ohmic load) max.
  144 W (24 V DC, τ = 0 ms)
• Maximum interrupting rating (inductive load)
  48 W (24 V DC, τ = 40 ms)
• Net weight
  175.68 g
• pluggable
  Yes
• Conductor cross-section AWG
  24 ... 16
• Category
  4
• Height
  112 mm
• Nominal input voltage UN
  230 V AC/DC
• Concurrence
  ∞
• Status display
  Green LED
• Sq. Total current
  72 A2
• Mechanical service life
  approx. 107 cycles
Output fuse
10 A gL/gG NEOZED (N/O contact)
Mounting position
any
Stripping length
8 mm
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Voltage at input/start and feedback circuit
~ 24 V DC
Operating voltage display
Green LED
Maximum switching voltage
250 V AC/DC
Limiting continuous current
6 A (N/O contact)
Switching capacity (360/h cycles)
6 A (24 V DC)
Mounting type
DIN rail mounting
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stop category
0
Performance level (PL)
e
Standards/regulations
DIN EN 50178/VDE 0160
Shock
15g
ECLASS 6.0
27371800
ECLASS 7.0
27371819
ETIM 6.0
EC001449
UNSPSC 19.0
39122205
UNSPSC 20.0
39122205
Width
22.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range in reference to UN
0.85 ... 1.1
Typical input current at UN
22 mA
Protective circuit
Surge protection Varistor 275 VRMS (A1-A2)
Maximum switching frequency
0.5 Hz
Nominal operating mode
100% operating factor
Degree of protection
IP20
Min. degree of protection of inst. location
IP54
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Designation
Air clearances and creepage distances between the power circuits
Rated insulation voltage
250 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371819
ECLASS 4.0
40020600
UNSPSC 11
39121501
UNSPSC 18.0
39122205
Maximum altitude
≤ 2000 m (Above sea level)
Typical release time
150 ms (when controlled via A1)
Recovery time
1 s
Contact type
3 enabling current paths
Minimum switching voltage
10 V AC/DC
Inrush current, minimum
10 mA
Switching capacity min.
100 mW
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Connection method
Push-in connection
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Overvoltage category
III
ECLASS 10.0.1
27371819
ECLASS 5.0
27371900
ECLASS 9.0
27371819
UNSPSC 6.01
30211901
ETIM 7.0
EC001449
UNSPSC 21.0
39122205
Safety Integrity Level (SIL)
3
Rated surge voltage/insulation
4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
Degree of pollution
2
ECLASS 4.1
40020600
ECLASS 5.1
27371900
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
Safety Integrity Level Claim Limit (SIL CL)
3
REACh SVHC
Lead 7439-92-1
Vibration (operation)
10 Hz ... 150 Hz, 2g
ETIM 3.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 13.2
39121501