2901417 Phoenix Contact Electrical Safety Devices

Product Details

• Contact material
  AgSnO2, + 0.2 µm Au
• Inrush current, minimum
  10 mA
• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Output fuse
  10 A gL/gG NEOZED (N/O contact)
• Mounting position
  any
• Conductor cross-section flexible with ferrule and plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Stripping length
  8 mm
• Standards/regulations
  DIN EN 50178/VDE 0160
• Shock
  15g
• ECLASS 4.0
  40020600
• ECLASS 7.0
  27371819
• ETIM 4.0
  EC001449
• UNSPSC 11
  39121501
• UNSPSC 18.0
  39122205
• Width
  22.5 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range in reference to UN
  0.85 ... 1.1
• Typical release time
  90 ms (when controlled via A1)
• Operating voltage display
  Green LED
• Max. permissible overall conductor resistance
  50 Ω
Protective circuit
Surge protection Varistor 275 VRMS (A1-A2)
Nominal operating mode
100% operating factor
Connection method
Push-in connection
Min. degree of protection of inst. location
IP54
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level (SIL)
3
Safety Integrity Level Claim Limit (SIL CL)
3
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
40020600
ETIM 3.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 6.01
30211901
Height
112 mm
Input voltage range
42 V AC/DC ... 48 V AC/DC
Typical input current at UN
95 mA
Concurrence
∞
Status display
Green LED
Maximum switching voltage
250 V AC/DC
Sq. Total current
72 A2
Switching capacity min.
100 mW
Net weight
175.34 g
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section AWG
24 ... 16
Performance level (PL)
e
Rated surge voltage/insulation
4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
ECLASS 11.0
27371819
ECLASS 5.1
27371900
ETIM 6.0
EC001449
UNSPSC 20.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-25 °C ... 55 °C
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Maximum altitude
≤ 2000 m (Above sea level)
Typical response time
40 ms (man. start)
Maximum switching frequency
0.5 Hz
Contact type
3 enabling current paths
Maximum inrush current
6 A
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stop category
0
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 10.0.1
27371819
ECLASS 9.0
27371819
UNSPSC 12.01
39121501
UNSPSC 19.0
39122205
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Voltage at input/start and feedback circuit
~ 24 V DC
Typ. starting time with Us
330 ms (when controlled via A1)
Recovery time
1 s
Minimum switching voltage
10 V AC/DC
Limiting continuous current
6 A (N/O contact)
Maximum interrupting rating (inductive load)
48 W (24 V DC, τ = 40 ms)
Mechanical service life
approx. 107 cycles
Mounting type
DIN rail mounting
pluggable
Yes
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 5.0
27371900
ECLASS 6.0
27371800
ETIM 7.0
EC001449
UNSPSC 13.2
39121501
UNSPSC 21.0
39122205