2900510 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  112 mm
• ECLASS 4.1
  40020600
• Depth
  114.5 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Typical input current at UN
  140 mA AC
• Contact type
  3 enabling current paths
• Maximum switching voltage
  250 V AC/DC
• Maximum interrupting rating (inductive load)
  48 W (24 V DC, τ = 40 ms)
• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Degree of protection
  IP20
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Stop category
  0
• Rated insulation voltage
  250 V
• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• Width
  22.5 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Voltage at input/start and feedback circuit
  approx. 24 V DC
• Recovery time
  1 s
• Limiting continuous current
  6 A (N/O contact)
• Interrupting rating (ohmic load) max.
  144 W (24 V DC, τ = 0 ms)
Switching capacity min.
100 mW
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
pluggable
Yes
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
3
Degree of pollution
2
ECLASS 10.0.1
27371819
ECLASS 5.1
27371900
ETIM 3.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 19.0
39122205
Ambient temperature (operation)
-20 °C ... 55 °C
Input voltage range in reference to UN
0.85 ... 1.1
Typical response time
20 ms (man. start)
Protective circuit
Surge protection Suppressor diode
Contact material
AgSnO2, + 0.2 µm Au
Minimum switching voltage
10 V AC/DC
Output fuse
10 A gL/gG NEOZED (N/O contact)
Mounting position
any
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4
Shock
15g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371900
ETIM 6.0
EC001449
UNSPSC 12.01
39121501
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Nominal input voltage UN
24 V AC/DC
Typical release time
45 ms (single-channel)
Max. permissible overall conductor resistance
approx. 50 Ω (Input and start circuits at UN)
Maximum inrush current
6 A
Sq. Total current
72 A2 (ITH2 = I12 + I22 + I32)
Mechanical service life
approx. 107 cycles
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Performance level (PL)
e
Standards/regulations
DIN EN 50178/VDE 0160
Overvoltage category
III
ECLASS 11.0
27371819
ECLASS 7.0
27371819
ETIM 4.0
EC001449
UNSPSC 20.0
39122205
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Operating voltage display
Green LED
Concurrence
∞
Status display
Green LED
Inrush current, minimum
10 mA
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Net weight
137.48 g
Conductor cross-section AWG
24 ... 16
Safety Integrity Level (SIL)
3
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
40020600
ECLASS 6.0
27371800
UNSPSC 13.2
39121501
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205
ECLASS 9.0
27371819
ETIM 7.0
EC001449
UNSPSC 11
39121501
UNSPSC 21.0
39122205