2900396 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Switching threshold "0" signal in reference to UN
  < 0.3
• Typical response time
  400 µs
• Type of protection
  Reverse polarity protection
• Output voltage range
  12 V DC ... 140 V DC (t < 1 s = 1.40 x UN)
• Assembly instructions
  In rows with zero spacing
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Ambient temperature (operation)
  -25 °C ... 70 °C
• Nominal input voltage UN
  110 V DC
• Operating voltage display
  Yellow LED
• Transmission frequency
  300 Hz
• Limiting continuous current
  3 A (see derating curve)
• Mounting position
  any
• Connection name
  Output side
• Conductor cross section AWG
  26 ... 14
• Rated surge voltage
  4 kV
• Overvoltage category
  III
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27371000
ECLASS 6.0
27371600
Width
6.2 mm
Degree of protection
IP20
Switching threshold "1" signal in reference to UN
> 0.6
Protective circuit/component
Parallel polarity protection diode
Voltage drop at max. limiting continuous current
< 150 mV
Operating mode
100% operating factor
Flammability rating according to UL 94
V0 (Housing)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371100
ETIM 2.0
EC001504
UNSPSC 6.01
30211916
UNSPSC 11
39121542
UNSPSC 7.0901
39121542
UNSPSC 21.0
39122326
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Input voltage range
77 V DC ... 137.5 V DC
Typical turn-off time
200 µs
Power dissipation for nominal condition
0.6 W
Output nominal voltage
110 V DC
Output circuit
2-conductor, floating
Stripping length
8 mm
Depth
86 mm
Input voltage range in reference to UN
0.7 ... 1.25 (t < 1 s = 0.6 ... 1.4 x UN)
Typical input current at UN
5.5 mA
Surge voltage protection
> 150 V
Test voltage
2.5 kV AC (Input/output)
Connection method
Push-in connection
Connection in acc. with standard
CUL
Rated insulation voltage
160 V DC
Pollution degree
2
ECLASS 10.0.1
27371604
ECLASS 4.1
27371100
ECLASS 7.0
27371604
ECLASS 9.0
27371604
UNSPSC 12.01
39121542
UNSPSC 20.0
39122326
Standards/regulations
IEC 60664
Insulation
Basic insulation
ECLASS 11.0
27371604
ECLASS 5.1
27371000
ETIM 3.0
EC001504
ETIM 4.0
EC001504
ETIM 7.0
EC001504
UNSPSC 18.0
39122326
ETIM 6.0
EC001504
UNSPSC 13.2
39122326
UNSPSC 19.0
39122326