2900351 Phoenix Contact Control Relays

Product Details

• Depth
  94 mm
• Width
  14 mm
• Degree of protection
  IP20 (Relay base)
• Input voltage range in reference to UN
  0.7 ... 1.25
• Coil voltage
  60 V DC
• Minimum switching voltage
  12 V AC/DC
• Note
  the following values are applicable if a gold layer is destroyed
• Flammability rating according to UL 94
  V0 (Housing)
• Connection method
  Push-in connection
• Conductor cross section AWG
  26 ... 14
• Pollution degree
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 11.0
  27371601
• Height
  80 mm
• Typical release time
  11 ms
• Power dissipation for nominal condition
  0.5 W
• Contact type
  2 changeover contacts
• Maximum inrush current
  15 A (300 ms)
• Mechanical service life
  approx. 3x 107 cycles
• Mounting position
  any
Connection in acc. with standard
CUL
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
4.5 mA
Operating voltage display
Yellow LED
Min. switching current
10 mA
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing
Connection name
Contact side
Rated surge voltage
6 kV
Insulation
Basic insulation
ECLASS 4.0
27371000
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Nominal input voltage UN
110 V DC
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371000
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
Typical response time
5 ms
Protective circuit
Bridge rectifier Bridge rectifier
Contact material
AgNi, hard gold-plated
Limiting continuous current
2x 6 A (see derating curve)
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
EN 50155 (VDE 0115 part 200)
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
ECLASS 6.0
27371600
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334