2900349 Phoenix Contact Control Relays

Product Details

• Test voltage
  5 kVrms (50 Hz, 1 min., winding/contact)
• Mechanical service life
  approx. 3x 107 cycles
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Input voltage range in reference to UN
  0.7 ... 1.25
• Typical response time
  5 ms
• Contact material
  AgNi, hard gold-plated
• Depth
  94 mm
• Typical input current at UN
  20 mA
• Protective circuit
  Bridge rectifier Bridge rectifier
• Minimum switching voltage
  5 V AC/DC
• Maximum inrush current
  8 A
• Flammability rating according to UL 94
  V0 (Housing)
• Height
  80 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C (Temperature class TX)
• Nominal input voltage UN
  24 V DC
• Power dissipation for nominal condition
  0.48 W
• Maximum switching voltage
  250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Mounting position
  any
• Connection in acc. with standard
  CUL
Pollution degree
2
ECLASS 4.0
27371000
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Degree of protection
RT III (Relay)
Coil voltage
12 V DC
Contact type
2 changeover contacts
Note
the following values are applicable if a gold layer is destroyed
Operating mode
100% operating factor
Connection name
Contact side
Connection method
Push-in connection
Rated insulation voltage
250 V AC
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ECLASS 5.1
27371600
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334
Width
14 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release time
11 ms
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Min. switching current
10 mA
Limiting continuous current
6 A
Switching capacity
2 A (at 24 V, DC13)
Stripping length
8 mm
Conductor cross section AWG
26 ... 14
Insulation
Basic insulation
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ECLASS 9.0
27371601
ETIM 7.0
EC001437
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Assembly instructions
In rows with zero spacing
Standards/regulations
EN 50155 (VDE 0115 part 200)
Designation
Corrosive gas test
ECLASS 10.0.1
27371601
ECLASS 4.1
27371000
ETIM 4.0
EC001437
UNSPSC 11
39121515
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated surge voltage
6 kV
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371601
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334