2900348 Phoenix Contact Control Relays

Product Details

• Degree of protection
  RT III (Relay)
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact material
  AgNi
• Flammability rating according to UL 94
  V0 (Housing)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  5 ms
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
• Maximum inrush current
  15 A (300 ms)
• Test voltage
  5 kVrms (50 Hz, 1 min., winding/contact)
• Connection method
  Push-in connection
• Conductor cross section AWG
  26 ... 14
• REACh SVHC
  Lead 7439-92-1
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ETIM 3.0
  EC001437
• UNSPSC 11
  39121515
• UNSPSC 20.0
  39122334
• Depth
  94 mm
• Typical release time
  11 ms
Type of switch contact
Single contact
Limiting continuous current
6 A
Mounting position
any
Stripping length
8 mm
Standards/regulations
EN 50155 (VDE 0115 part 200)
Insulation
Basic insulation
Pollution degree
2
ECLASS 4.1
27371000
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Height
80 mm
Nominal input voltage UN
110 V DC
Typical input current at UN
4.5 mA
Contact type
2 changeover contacts
Min. switching current
10 mA (At 5 V)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
approx. 3x 107 cycles
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
Designation
Corrosive gas test
ECLASS 4.0
27371000
ECLASS 5.1
27371600
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
Width
14 mm
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Input voltage range in reference to UN
0.7 ... 1.25
Coil voltage
60 V DC
Power dissipation for nominal condition
0.5 W
Minimum switching voltage
5 V (at 10 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 13.2
39122334
Assembly instructions
In rows with zero spacing
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ECLASS 9.0
27371601
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334