2900347 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Typical input current at UN
  6 mA
• Protective circuit
  Bridge rectifier Bridge rectifier
• Min. switching current
  10 mA (At 5 V)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Height
  80 mm
• Typical response time
  5 ms
• Operating voltage display
  Yellow LED
• Contact material
  AgNi
• Limiting continuous current
  6 A
• Operating mode
  100% operating factor
• Assembly instructions
  In rows with zero spacing
• Conductor cross section AWG
  26 ... 14
• Pollution degree
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27371600
• ETIM 4.0
  EC001437
• UNSPSC 6.01
  30211916
• UNSPSC 13.2
  39122334
• Depth
  94 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release time
11 ms
Type of switch contact
Single contact
Minimum switching voltage
5 V (at 10 mA)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
approx. 3x 107 cycles
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371601
ECLASS 4.1
27371000
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
Width
14 mm
Nominal input voltage UN
72 V DC
Power dissipation for nominal condition
0.43 W
Contact type
2 changeover contacts
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V0 (Housing)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
Designation
Corrosive gas test
ECLASS 7.0
27371601
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 12.01
39121515
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Degree of protection
RT III (Relay)
Coil voltage
48 V DC
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Maximum inrush current
15 A (300 ms)
Connection name
Contact side
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 4.0
27371000
ETIM 2.0
EC001437
UNSPSC 11
39121515
UNSPSC 19.0
39122334
UNSPSC 21.0
39122334
Mounting position
any
Connection method
Push-in connection
Standards/regulations
EN 50155 (VDE 0115 part 200)
Insulation
Basic insulation
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 20.0
39122334