2900346 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Nominal input voltage UN
  24 V DC
• Input voltage range in reference to UN
  0.7 ... 1.25
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
• Limiting continuous current
  6 A
• Operating mode
  100% operating factor
• Mounting position
  any
• Stripping length
  8 mm
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Pollution degree
  2
• ECLASS 10.0.1
  27371601
• ECLASS 4.1
  27371000
• ECLASS 7.0
  27371601
• ECLASS 9.0
  27371601
• UNSPSC 6.01
  30211916
• UNSPSC 12.01
  39121515
• UNSPSC 11
  39121515
• Depth
  94 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
Typical input current at UN
20 mA
Contact type
2 changeover contacts
Power dissipation for nominal condition
0.48 W
Maximum inrush current
15 A (300 ms)
Min. switching current
10 mA (At 5 V)
Assembly instructions
In rows with zero spacing
Connection method
Push-in connection
Standards/regulations
EN 50155 (VDE 0115 part 200)
Insulation
Basic insulation
Designation
Corrosive gas test
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Width
14 mm
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Typical response time
5 ms
Protective circuit
Bridge rectifier Bridge rectifier
Contact material
AgNi
Type of switch contact
Single contact
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
approx. 3x 107 cycles
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371000
ECLASS 6.0
27371600
ETIM 7.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
RT III (Relay)
Typical release time
11 ms
Coil voltage
12 V DC
Minimum switching voltage
5 V (at 10 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334