2900336 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Nominal input voltage UN
  230 V AC
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact type
  2 changeover contacts
• Min. switching current
  10 mA (At 5 V)
• Flammability rating according to UL 94
  V0 (Housing)
• Connection name
  Contact side
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Designation
  Corrosive gas test
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.1
  27371000
• ECLASS 9.0
  27371601
• ETIM 4.0
  EC001437
• UNSPSC 12.01
  39121515
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Degree of protection
  RT III (Relay)
• Typical response time
  7 ms
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Operating mode
  100% operating factor
Stripping length
8 mm
Pollution degree
2
ECLASS 5.0
27371600
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Mechanical service life
3x 107 cycles
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371000
ECLASS 7.0
27371601
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Width
14 mm
Depth
94 mm
Typical input current at UN
4.3 mA (at 220 V DC)
Power dissipation for nominal condition
0.99 W
Type of switch contact
Single contact
Maximum inrush current
15 A (300 ms)
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
Overvoltage category
III
Insulation
Safe isolation of input/output
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release time
10 ms
Operating voltage display
Yellow LED
Contact material
AgNi
Minimum switching voltage
5 V AC/DC (at 10 mA)
Limiting continuous current
6 A
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ETIM 2.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334