2900326 Phoenix Contact Control Relays

Product Details

• Width
  14 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C (Temperature class TX)
• Input voltage range in reference to UN
  0.7 ... 1.25
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact type
  1 changeover contact
• Minimum switching voltage
  12 V (at 10 mA)
• Height
  80 mm
• Degree of protection
  RT III (Relay)
• Typical response time
  5 ms
• Coil voltage
  60 V DC
• Typical release time
  11 ms
• Contact material
  AgNi
• Maximum inrush current
  30 A (300 ms)
• Operating mode
  100% operating factor
• Mounting position
  any
• Connection in acc. with standard
  CUL
• Rated surge voltage
  6 kV
• Designation
  Corrosive gas test
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27371600
ECLASS 5.1
27371600
UNSPSC 11
39121515
UNSPSC 12.01
39121515
ECLASS 9.0
27371601
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Depth
94 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
4.5 mA
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.5 W
Type of switch contact
Single contact
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (24 V (DC13))
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Insulation
Basic insulation
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Nominal input voltage UN
110 V DC
Limiting continuous current
10 A (With inserted bridge 2967691)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Flammability rating according to UL 94
V0 (Housing)
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371000
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 3x 107 cycles
Connection name
Contact side
Connection method
Push-in connection
Standards/regulations
EN 50155 (VDE 0115 part 200)
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 4.1
27371000
ECLASS 7.0
27371601
ETIM 6.0
EC001437
ETIM 4.0
EC001437
UNSPSC 18.0
39122334