2900325 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical release time
  11 ms
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact type
  1 changeover contact
• Minimum switching voltage
  12 V (at 10 mA)
• Flammability rating according to UL 94
  V0 (Housing)
• Mounting position
  any
• Conductor cross section AWG
  26 ... 14
• Rated surge voltage
  6 kV
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27371600
• Width
  14 mm
• Nominal input voltage UN
  72 V DC
• Type of switch contact
  Single contact
• Min. switching current
  10 mA (at 12 V)
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Mechanical service life
  approx. 3x 107 cycles
• Assembly instructions
  In rows with zero spacing
• Stripping length
  8 mm
Connection in acc. with standard
CUL
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371000
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 13.2
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
94 mm
Typical input current at UN
6 mA
Typical response time
5 ms
Operating voltage display
Yellow LED
Contact material
AgNi
Maximum inrush current
30 A (300 ms)
Switching capacity
2 A (24 V (DC13))
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27371000
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
Insulation
Basic insulation
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Degree of protection
RT III (Relay)
Coil voltage
48 V DC
Power dissipation for nominal condition
0.43 W
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Limiting continuous current
10 A (With inserted bridge 2967691)
Operating mode
100% operating factor
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
EN 50155 (VDE 0115 part 200)
Designation
Corrosive gas test
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 11
39121515
UNSPSC 21.0
39122334
ETIM 4.0
EC001437
UNSPSC 18.0
39122334