2900324 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  80 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C (Temperature class TX)
• Width
  14 mm
• Depth
  94 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage UN
  24 V DC
• Typical release time
  11 ms
• Operating voltage display
  Yellow LED
• Contact material
  AgNi
• Min. switching current
  10 mA (at 12 V)
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Operating mode
  100% operating factor
• Mounting position
  any
• Connection method
  Push-in connection
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Standards/regulations
  EN 50155 (VDE 0115 part 200)
• Insulation
  Basic insulation
• Overvoltage category
  III
• Identification
  ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 4.1
27371000
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 11
39121515
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Input voltage range in reference to UN
0.7 ... 1.25
Typical response time
5 ms
Protective circuit
Bridge rectifier Bridge rectifier
Power dissipation for nominal condition
0.48 W
Type of switch contact
Single contact
Minimum switching voltage
12 V (at 10 mA)
Limiting continuous current
10 A (With inserted bridge 2967691)
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 3x 107 cycles
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
Pollution degree
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371000
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ETIM 4.0
EC001437
Degree of protection
RT III (Relay)
Typical input current at UN
20 mA
Coil voltage
12 V DC
Contact type
1 changeover contact
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Maximum inrush current
30 A (300 ms)
Switching capacity
2 A (24 V (DC13))
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 19.0
39122334