2900323 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Degree of protection
  RT III (Relay)
• Typical input current at UN
  2 mA
• Ambient temperature (operation)
  -40 °C ... 70 °C (Temperature class TX)
• Input voltage range in reference to UN
  0.7 ... 1.25
• Power dissipation for nominal condition
  0.22 W
• Minimum switching voltage
  12 V AC/DC
• Switching capacity
  2 A (at 24 V, DC13)
• Mounting position
  any
• Standards/regulations
  EN 50155 (VDE 0115 part 200)
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 10.0.1
  27371601
• ECLASS 5.0
  27371600
• ECLASS 7.0
  27371601
• ETIM 7.0
  EC001437
• UNSPSC 7.0901
  39121515
• Height
  80 mm
• Depth
  94 mm
• Typical release time
  4 ms
• Contact type
  1 changeover contact
Contact material
AgSnO, hard gold-plated
Limiting continuous current
6 A (see derating curve)
Mechanical service life
approx. 2x 107 cycles
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated surge voltage
6 kV
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371000
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
Nominal input voltage UN
110 V DC
Coil voltage
60 V DC
Type of switch contact
Single contact
Maximum inrush current
50 mA
Note
the following values are applicable if a gold layer is destroyed
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Overvoltage category
III
Designation
Corrosive gas test
ECLASS 6.0
27371600
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
4 ms
Operating voltage display
Yellow LED
Min. switching current
10 mA
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27371000
ECLASS 9.0
27371601
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
Protective circuit
Bridge rectifier Bridge rectifier
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
ECLASS 11.0
27371601
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 20.0
39122334