2900322 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Height
  80 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  3 mA
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact type
  1 changeover contact
• Minimum switching voltage
  12 V AC/DC
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Operating mode
  100% operating factor
• Connection name
  Contact side
• Conductor cross section AWG
  26 ... 14
• Rated surge voltage
  6 kV
• Designation
  Corrosive gas test
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.1
  27371600
• Depth
  94 mm
• Degree of protection
  RT III (Relay)
• Typical release time
  4 ms
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Switching capacity
1 A (24 V (DC13))
Flammability rating according to UL 94
V0 (Housing)
Connection method
Push-in connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
EN 50155 (VDE 0115 part 200)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371000
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Power dissipation for nominal condition
0.22 W
Contact material
AgSnO, hard gold-plated
Min. switching current
10 mA
Limiting continuous current
6 A
Note
the following values are applicable if a gold layer is destroyed
Mechanical service life
approx. 2x 107 cycles
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Nominal input voltage UN
72 V DC
Typical response time
4 ms
Coil voltage
48 V DC
Type of switch contact
Single contact
Maximum inrush current
50 mA
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Stripping length
8 mm
Connection in acc. with standard
CUL
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 4.1
27371000
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 11
39121515
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
UNSPSC 21.0
39122334